Type 4 Wall Ties 200mm for use in masonry cavity walls with a cavity width of 50–75mm, providing secure restraint between masonry leaves while allowing for differential movement. As a Type 4 tie to BS EN 845-1, these are suitable for dwellings up to 10m high in sheltered environments, typically where basic wind speed is below 27m/s. Their classification ensures they are correctly specified for residential construction in low-exposure conditions. Each tie features an indented profile to improve mortar bond and provide effective wall stability. At 200mm, they are specifically proportioned for cavities of 50–75mm, ensuring correct embedment into both leaves of the wall. Manufactured from stainless steel, they are resistant to corrosion and offer long service life without need for replacement.

Read more less

Type 4 Wall Ties 225mm for use in cavity walls with widths of 76–100mm, providing secure restraint between masonry leaves while allowing for differential movement. As a Type 4 tie to BS EN 845-1, these are suitable for dwellings up to 10m high in sheltered environments, typically where basic wind speed is below 27m/s. Their classification ensures they are correctly specified for residential construction in low-exposure conditions. Each tie features an indented profile to improve mortar bond and provide effective wall stability. 225mm length ensures sufficient embedment in both masonry leaves when bridging cavities up to 100mm wide. This guarantees compliance with structural requirements and prevents bridging or inadequate seating. Manufactured from stainless steel, they are resistant to corrosion and offer long service life without need for replacement.

Read more less

Galvanised Steel Wall Starter Kit supplied in a 2236mm length for securely joining new masonry walls to existing structures.  Designed for use with single-skin brick or block walls, it provides a stable and continuous mechanical connection, maintaining alignment and structural integrity between new and existing wall sections.  Manufactured from high-quality galvanised steel for corrosion resistance and long service life, the system ensures a reliable bond without the need for keying or cutting into the existing masonry.  The 2236mm length accommodates most standard wall heights, providing a continuous and durable fixing line.

Read more less

Polyethylene Damp Proof Course (DPC) in 600mm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Polyethylene Damp Proof Course (DPC) in 450mm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Polyethylene Damp Proof Course (DPC) in 300mm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Polyethylene Damp Proof Course (DPC) in 225mmmm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Polyethylene Damp Proof Course (DPC) in 150mm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Polyethylene Damp Proof Course (DPC) in 100mm width and 30m length - a durable domestic-grade barrier produced in the UK from high-quality reprocessed polyethylene.  It is designed to prevent the passage of moisture through brick and blockwork in homes up to two storeys. Installed horizontally within mortar joints, typically 150mm above ground level, it provides essential protection against rising damp.  It can also be used vertically, giving secure damp proofing around openings, junctions, and where floor or ground levels vary externally. The product’s distinct embossed surface enhances bonding with mortar, ensuring installation integrity and reliable long-term performance. Flexible even in cold weather, it remains workable down to –20°C, making it suitable for year-round site use. Manufactured under ISO 9001 quality management, it meets stringent UK and EU standards, including BS 6515 and CE marking to EN 14909. Its chemically inert and non-hazardous composition ensures safe, clean handling on site. A cost-effective choice for domestic projects, this polyethylene DPC combines robust manufacture with compliance assurance, offering proven resistance to moisture ingress in masonry construction.

Read more less

Smooth blue Class B engineering brick, 65mm, supplied in solid form for enhanced strength and resilience in demanding applications. Designed for high-load applications, it provides compressive strength in excess of 75N/mm² and low water absorption, making it suitable for use in structural walls, retaining walls, and foundations both above and below ground. At 65mm high, this brick conforms to the UK standard work size (215mm x 102.5mm x 65mm), ensuring full compatibility with common walling and coursing dimensions.  Its size allows straightforward integration with standard mortar joint thicknesses, maintaining bond patterns and structural integrity. The rich blue tone is achieved by firing in a low-oxygen atmosphere, producing a consistent, uniform finish.

Read more less

Smooth blue Class B engineering brick, 65mm, with perforations to reduce unit weight and improve mortar bond during construction. Designed for high-strength applications, it offers compressive strength in excess of 75N/mm² and low water absorption, making it suitable for use in loadbearing walls both above and below ground. At 65mm high, this brick conforms to the UK standard work size (215mm x 102.5mm x 65mm), ensuring compatibility with common walling and coursing dimensions.  Its size allows for straightforward integration with standard mortar joint thicknesses, maintaining bond patterns and structural integrity.  The blue tone results from low-oxygen kiln firing, giving a consistent, uniform finish.

Read more less

Smooth red Class B engineering brick, 65mm, supplied in solid form for enhanced strength and resilience in demanding applications. Designed for high-load applications, it provides compressive strength in excess of 75N/mm² and low water absorption, making it suitable for use in structural walls, retaining walls, and foundations both above and below ground. At 65mm high, this brick conforms to the UK standard work size (215mm x 102.5mm x 65mm), ensuring full compatibility with common walling and coursing dimensions.  Its size allows straightforward integration with standard mortar joint thicknesses, maintaining bond patterns and structural integrity. The rich red tone is achieved by firing in an oxygen-rich atmosphere, producing a consistent, uniform finish.

Read more less