Description
Product Overview
Green UC3 pressure-treated softwood feather edge fence board, measuring 1800mm in length with a 22mm x 125mm section (finished size approx. 16mm x 119mm). Each board is feathered along its width so it overlaps with its neighbour, forming a strong and continuous face typical of closeboard fencing.
At 1800mm long, it is sized for 6ft fences and fixed vertically to horizontal rails with either timber or concrete posts.
Features & Benefits
-
UC3 preservative treatment: Increases durability for long-term external use above ground.
-
Pressure-treated softwood: Protects against fungal decay, rot, and insect attack.
-
Green colour tint: Natural treatment tone that weathers over time to silvery grey.
-
Feather edge profile: Overlapping design improves privacy, wind resistance, and water run-off.
-
Natural timber appearance: Complements traditional fencing styles.
-
Workable material: Easy to cut and adjust on site for uneven ground or repairs.
-
Board length 1800mm: Sized for 6ft fencing projects.
-
Section size 22mm x 125mm (nominal): Finished size approx. 16mm x 119mm.
Colour and finish are representative only and may vary slightly as this is a natural product.
Applications
Can be used with 6ft closeboard fencing, or shorter fence lines when combined with gravel boards or trellis.
-
Fence panel support (6ft height): Forms the continuous vertical face of a closeboard fence.
-
Domestic garden fencing: Defines boundaries with high privacy.
-
Panel compatibility: Used to construct closeboard or feather edge fencing.
-
Panel and gravel board use: Always fixed above gravel boards for extended service life.
Installation Guidance
-
Ground embedment: Boards must not be set directly into the ground; always use gravel boards.
-
Fixing method: Nail or screw vertically to arris rails or backing rails.
-
End grain protection: Treat cut ends with a suitable preservative.
Compliance & Performance
-
Preservative treatment: Pressure-treated to UC3 with copper-based preservative.
-
Service class: Suitable for service class 3 external applications.
