Product Overview Green UC3 pressure-treated softwood feather edge fence board, measuring 1800mm in length with a 22mm x 125mm section (finished size approx. 16mm x 119mm). Each board is feathered along its width so it overlaps with its neighbour, forming a strong and continuous face typical of closeboard fencing. At 1800mm long, it is sized for 6ft fences and fixed vertically to horizontal rails with either timber or concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against fungal decay, rot, and insect attack. Green colour tint: Natural treatment tone that weathers over time to silvery grey. Feather edge profile: Overlapping design improves privacy, wind resistance, and water run-off. Natural timber appearance: Complements traditional fencing styles. Workable material: Easy to cut and adjust on site for uneven ground or repairs. Board length 1800mm: Sized for 6ft fencing projects. Section size 22mm x 125mm (nominal): Finished size approx. 16mm x 119mm. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 6ft closeboard fencing, or shorter fence lines when combined with gravel boards or trellis. Fence panel support (6ft height): Forms the continuous vertical face of a closeboard fence. Domestic garden fencing: Defines boundaries with high privacy. Panel compatibility: Used to construct closeboard or feather edge fencing. Panel and gravel board use: Always fixed above gravel boards for extended service life. Installation Guidance Ground embedment: Boards must not be set directly into the ground; always use gravel boards. Fixing method: Nail or screw vertically to arris rails or backing rails. End grain protection: Treat cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 with copper-based preservative. Service class: Suitable for service class 3 external applications.

Read more less

Product Overview Green UC3 pressure-treated softwood feather edge fence board, measuring 1800mm in length with a 22mm x 150mm section (finished size approx. 16mm x 144mm). Each board is feathered along its width so it overlaps with its neighbour, forming a strong and continuous face typical of closeboard fencing.At 1800mm long, it is sized for 6ft fences and fixed vertically to horizontal rails with either timber or concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against fungal decay, rot, and insect attack. Green colour tint: Natural treatment tone that weathers over time to silvery grey. Feather edge profile: Overlapping design improves privacy, wind resistance, and water run-off. Natural timber appearance: Complements traditional fencing styles. Workable material: Easy to cut and adjust on site for uneven ground or repairs. Board length 1800mm: Sized for 6ft fencing projects. Section size 22mm x 150mm (nominal): Finished size approx. 16mm x 144mm. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 6ft closeboard fencing, or shorter fence lines when combined with gravel boards or trellis. Fence panel support (6ft height): Forms the continuous vertical face of a closeboard fence. Domestic garden fencing: Defines boundaries with high privacy. Panel compatibility: Used to construct closeboard or feather edge fencing. Panel and gravel board use: Always fixed above gravel boards for extended service life. Installation Guidance Ground embedment: Boards must not be set directly into the ground; always use gravel boards. Fixing method: Nail or screw vertically to arris rails or backing rails. End grain protection: Treat cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 with copper-based preservative. Service class: Suitable for service class 3 external applications.

Read more less

Product Overview Brown UC3 pressure-treated softwood feather edge panel, measuring 1830mm x 915mm (6’ x 3’). Overlapping vertical boards create a solid, gap-free screen, while the stabilising rear battens strengthen the panel against wind and handling. Provides full-height screening for 3ft garden fencing. Can be fixed to timber posts with clips or screws, or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Overlapping feather edge design: Prevents gaps forming between boards as timber moves. Traditional timber appearance: Complements both contemporary and classic garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Horizontal rear battens: Reinforces structure and stability for reliable performance. Panel size 1830mm x 915mm: Provides full 3ft screening, suitable for low-level boundaries or decorative fencing. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 3ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (3ft panels): Provides full-height low-level screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood horizontal lap panel, measuring 1830mm x 915mm (6’ x 3’). The overlapping horizontal slats shed rainwater quickly, reducing standing moisture on the surface and helping to limit weathering over time. Provides full-height screening for 3ft garden fencing. Typically chosen as a cost-effective alternative to feather edge panels, it can be fixed to timber posts with clips or screws or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Horizontal lap design: Overlapping slats shed rainwater efficiently, helping limit surface weathering. Traditional timber appearance: Creates a classic, rustic boundary suitable for most garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Pre-assembled panel: Speeds up installation compared to site-built fencing. Panel size 1830mm x 915mm: Provides full 3ft screening, suitable for low-level boundaries or decorative fencing. Please Note: Colour and finish may vary slightly as this is a natural timber product. Due to manufacturing variation, panels may contain either 3 or 4 horizontal sections; this does not affect structural performance and is purely aesthetic. Applications Can be used with 3ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (3ft panels): Provides full-height low-level screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood feather edge panel, measuring 1830mm x 1220mm (6’ x 4’). Overlapping vertical boards create a solid, gap-free screen, while the stabilising rear battens strengthen the panel against wind and handling. Provides full-height screening for 4ft garden fencing. Can be fixed to timber posts with clips or screws, or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Overlapping feather edge design: Prevents gaps forming between boards as timber moves. Traditional timber appearance: Complements both contemporary and classic garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Horizontal rear battens: Reinforces structure and stability for reliable performance. Panel size 1830mm x 1220mm: Provides full 4ft privacy and security for garden boundaries. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 4ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (4ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood horizontal lap panel, measuring 1830mm x 1220mm (6’ x 4’). The overlapping horizontal slats shed rainwater quickly, reducing standing moisture on the surface and helping to limit weathering over time. Provides full-height screening for 4ft garden fencing. Typically chosen as a cost-effective alternative to feather edge panels, it can be fixed to timber posts with clips or screws or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Horizontal lap design: Overlapping slats shed rainwater efficiently, helping limit surface weathering. Traditional timber appearance: Creates a classic, rustic boundary suitable for most garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Pre-assembled panel: Speeds up installation compared to site-built fencing. Panel size 1830mm x 1220mm: Provides full 4ft privacy and security for garden boundaries. Please Note: Colour and finish may vary slightly as this is a natural timber product. Due to manufacturing variation, panels may contain either 3 or 4 horizontal sections; this does not affect structural performance and is purely aesthetic. Applications Can be used with 4ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (4ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood feather edge panel, measuring 1830mm x 1525mm (6’ x 5’). Overlapping vertical boards create a solid, gap-free screen, while the stabilising rear battens strengthen the panel against wind and handling. Provides full-height screening for 5ft garden fencing. Can be fixed to timber posts with clips or screws, or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Overlapping feather edge design: Prevents gaps forming between boards as timber moves. Traditional timber appearance: Complements both contemporary and classic garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Horizontal rear battens: Reinforces structure and stability for reliable performance. Panel size 1830mm x 1525mm: Provides full 5ft privacy and security for garden boundaries. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 5ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (5ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood horizontal lap panel, measuring 1830mm x 1525mm (6’ x 5’). The overlapping horizontal slats shed rainwater quickly, reducing standing moisture on the surface and helping to limit weathering over time. Provides full-height screening for 5ft garden fencing. Typically chosen as a cost-effective alternative to feather edge panels, it can be fixed to timber posts with clips or screws or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Horizontal lap design: Overlapping slats shed rainwater efficiently, helping limit surface weathering. Traditional timber appearance: Creates a classic, rustic boundary suitable for most garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Pre-assembled panel: Speeds up installation compared to site-built fencing. Panel size 1830mm x 1525mm: Provides full 5ft privacy and security for garden boundaries. Please Note: Colour and finish may vary slightly as this is a natural timber product. Due to manufacturing variation, panels may contain either 3 or 4 horizontal sections; this does not affect structural performance and is purely aesthetic. Applications Can be used with 5ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (5ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood feather edge panel, measuring 1830mm x 1830mm (6’ x 6’). Overlapping vertical boards create a solid, gap-free screen, while the stabilising rear battens strengthen the panel against wind and handling. Provides full-height screening for 6ft garden fencing. Can be fixed to timber posts with clips or screws, or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Overlapping feather edge design: Prevents gaps forming between boards as timber moves. Traditional timber appearance: Complements both contemporary and classic garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Horizontal rear battens: Reinforces structure and stability for reliable performance. Panel size 1830mm x 1830mm: Provides full 6ft privacy and security for garden boundaries. Colour and finish are representative only and may vary slightly as this is a natural product. Applications Can be used with 6ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (6ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Brown UC3 pressure-treated softwood horizontal lap panel, measuring 1830mm x 1830mm (6’ x 6’). The overlapping horizontal slats shed rainwater quickly, reducing standing moisture on the surface and helping to limit weathering over time. Provides full-height screening for 6ft garden fencing. Typically chosen as a cost-effective alternative to feather edge panels, it can be fixed to timber posts with clips or screws or slotted into concrete posts. Features & Benefits UC3 preservative treatment: Increases durability for long-term external use above ground. Pressure-treated softwood: Protects against rot, fungal decay, and insect attack. Brown colour tint: Natural tone that blends easily into garden environments. Horizontal lap design: Overlapping slats shed rainwater efficiently, helping limit surface weathering. Traditional timber appearance: Creates a classic, rustic boundary suitable for most garden styles. Workable softwood material: Can be cut or adjusted on site for custom installations. Pre-assembled panel: Speeds up installation compared to site-built fencing. Panel size 1830mm x 1830mm: Provides full 6ft privacy and security for garden boundaries. Please Note: Colour and finish may vary slightly as this is a natural timber product. Due to manufacturing variation, panels may contain either 3 or 4 horizontal sections; this does not affect structural performance and is purely aesthetic. Applications Can be used with 6ft panels, or combined with gravel boards or trellis to achieve different fencing heights. Fence panel support (6ft panels): Provides full-height privacy screening. Domestic garden fencing: Defines boundaries and increases security. Panel compatibility: Suitable for lap, featheredge, closeboard, and decorative styles. Panel and gravel board use: Compatible with gravel boards for extended lifespan and flexible layouts. Installation Guidance Ground embedment: Fix securely between UC4-treated timber or concrete posts. Fixing method: Attach using panel clips, galvanised screws, or nails. End grain protection: Retreat any cut ends with a suitable preservative. Compliance & Performance Preservative treatment: Pressure-treated to UC3 for external above-ground use. Service class: Rated for service class 3 environments.

Read more less

Product Overview Reinforced concrete gravel board with a recessed finish, measuring 1830mm (6ft) long, 150mm (6in) high, and 50mm thick. Installed at the base of fencing, it lifts panels above ground level and protects them from moisture, dirt, and vermin. Compatible with slotted concrete posts or with timber posts when secured using brackets. Features & Benefits Reinforced concrete construction: Provides long-lasting durability at ground level. Rot protection: Prevents timber fence panels from rotting through ground contact. Recessed-faced finish: Creates a defined, uniform appearance along the fence line. Barrier against dirt and debris: Keeps panels clean and free from soil build-up. Vermin deterrent: Acts as a physical barrier against burrowing pests. Standard length 1830mm (6ft): Matches common fence panel widths for straightforward installation. 50mm thickness: Ensures strong support and resistance against pressure from soil. 6in (150mm) height: Increases overall fence height by 150mm, ideal for standard garden runs. Please Note: In certain areas of Scotland and Northern England, a minimum order quantity may apply to specific concrete products. Applications Fence panel support: Suitable for standard 1.8m (6ft) panels. Domestic garden fencing: Provides ground-level protection for boundary panels. Panel compatibility: Works with lap, closeboard, featheredge, and decorative styles. Boundary protection: Prevents soil, moisture, and pests from reaching timber panels. Installation Guidance Post installation: Slot into slotted concrete posts or fix to timber posts with galvanised brackets. Ground positioning: Set flush with ground level to block soil and moisture contact. Alignment: Check boards are level to maintain straight, stable fence runs. Compliance & Performance Reinforced concrete manufacture: Provides strength and durability in permanent fencing. Ground contact suitability: Withstands continuous exposure to soil and moisture.

Read more less

Product Overview Reinforced concrete gravel board with a recessed finish, measuring 1830mm (6ft) long, 305mm (12in) high, and 50mm thick. Installed at the base of fencing, it lifts panels above ground level and protects them from moisture, dirt, and vermin. Compatible with slotted concrete posts or with timber posts when secured using brackets. Features & Benefits Reinforced concrete construction: Provides long-lasting durability at ground level. Rot protection: Prevents timber fence panels from rotting through ground contact. Recessed-faced finish: Creates a defined, uniform appearance along the fence line. Barrier against dirt and debris: Keeps panels clean and free from soil build-up. Vermin deterrent: Acts as a physical barrier against burrowing pests. Standard length 1830mm (6ft): Matches common fence panel widths for straightforward installation. 50mm thickness: Ensures strong support and resistance against pressure from soil. 12in (305mm) height: Increases overall fence height by 305mm, ideal for taller or more exposed runs. Please Note: In certain areas of Scotland and Northern England, a minimum order quantity may apply to specific concrete products. Applications Fence panel support: Suitable for standard 1.8m (6ft) panels. Domestic garden fencing: Provides ground-level protection for boundary panels. Panel compatibility: Works with lap, closeboard, featheredge, and decorative styles. Boundary protection: Prevents soil, moisture, and pests from reaching timber panels. Installation Guidance Post installation: Slot into slotted concrete posts or fix to timber posts with galvanised brackets. Ground positioning: Set flush with ground level to block soil and moisture contact. Alignment: Check boards are level to maintain straight, stable fence runs. Compliance & Performance Reinforced concrete manufacture: Provides strength and durability in permanent fencing. Ground contact suitability: Withstands continuous exposure to soil and moisture.

Read more less